How To Fix A Door That Won’T Close

Home » Technology » How To Fix A Door That Won’T Close

How to Fix a Door That Won’t Close:

Having trouble with a stubborn door that just won’t close? Don’t worry, we’ve got you covered! In this guide, we’ll walk you through some simple solutions to fix that pesky problem. Whether it’s misaligned hinges, a swollen door frame, or loose screws, we’ve got the tips and tricks you need to get your door back on track.

So, let’s dive in and learn how to fix a door that won’t close!

Common reasons why a door won’t close properly

How to fix a door that won't close

When a door fails to close properly, it can be frustrating and inconvenient. There are several common reasons why this may occur, including:

Misaligned hinges

Misaligned hinges can prevent a door from closing smoothly. Hinges may become loose over time or due to excessive use, causing the door to sag or become misaligned. When the hinges are not properly aligned, the door may not fit into the frame correctly, resulting in difficulty closing it.

Swollen or warped door frame

A swollen or warped door frame can also affect the door’s ability to close properly. Changes in temperature and humidity can cause the door frame to expand or contract, leading to misalignment. This can prevent the door from fitting snugly into the frame and result in gaps or resistance when closing.

Loose screws or hinges

Loose screws or hinges can contribute to a door not closing properly. Over time, screws can become loose or hinges may wear out, causing the door to become misaligned or uneven. This can result in difficulty closing the door smoothly or even cause it to stick.

Steps to fix a door that won’t close

Locksmith spokane

To fix a door that won’t close, you can follow these step-by-step instructions:

Fixing a misaligned door, How to fix a door that won’t close

If your door is misaligned and not closing properly, you can try the following steps:

  1. Check the hinges: Inspect the hinges to see if they are loose or damaged. If they are loose, tighten the screws using a screwdriver. If the hinges are damaged, consider replacing them.
  2. Adjust the strike plate: The strike plate is the metal plate attached to the door frame that the latch engages with. If the door is misaligned, the latch may not properly engage with the strike plate. Use a screwdriver to loosen the screws holding the strike plate in place and then adjust its position. Tighten the screws once the strike plate is properly aligned.
  3. Shim the hinges: If the misalignment is severe, you may need to use shims to adjust the positioning of the hinges. Place a shim between the hinge and the door frame to create a better fit.
  4. Check the door frame: Inspect the door frame for any signs of warping or damage. If the frame is damaged, you may need to repair or replace it.

Fixing a swollen or warped door frame

If your door frame is swollen or warped, causing the door to stick and not close properly, you can try the following steps:

  1. Identify the problem area: Examine the door frame to determine where it is swollen or warped.
  2. Apply moisture: If the door frame is swollen due to moisture, you can try applying moisture to the affected area using a wet cloth. This may help the wood expand and return to its original shape.
  3. Remove excess material: If the door frame is warped, you may need to remove excess material using a chisel or sandpaper. Gradually remove small amounts of material until the frame is no longer warped.
  4. Repair or replace the frame: If the door frame is severely damaged, you may need to repair or replace it. Consult a professional if needed.

Tightening loose screws or hinges

If your door won’t close properly due to loose screws or hinges, you can try the following steps:

  1. Inspect the screws and hinges: Check all the screws and hinges on the door and door frame.
  2. Tighten the screws: Use a screwdriver to tighten any loose screws. Make sure not to overtighten as it may cause damage.
  3. Replace damaged screws or hinges: If any screws or hinges are damaged beyond repair, replace them with new ones.

Using lubricants to fix a door that won’t close smoothly

To fix a door that won’t close smoothly, you can try using lubricants. Here’s how:

  1. Choose the right lubricant: Select a lubricant suitable for your door and hinges. Silicone spray or graphite lubricant are commonly used for this purpose.
  2. Apply the lubricant: Spray or apply the lubricant to the hinges, moving parts, and any areas where friction occurs.
  3. Operate the door: Open and close the door several times to distribute the lubricant evenly.
  4. Wipe off excess lubricant: Use a clean cloth to remove any excess lubricant from the door and hinges.

Remember to test the door after each step to see if it closes properly. If the problem persists, it may be best to consult a professional for further assistance.

Tips and tricks for maintaining properly closing doors


Proper maintenance is key to ensuring that doors close smoothly and securely. Here are some tips and tricks to help you keep your doors in top condition:

Preventing doors from becoming misaligned

Doors can become misaligned over time due to factors such as settling of the building, temperature changes, or improper installation. To prevent doors from becoming misaligned:

  • Ensure that doors are properly installed, with the hinges aligned correctly.
  • Avoid slamming doors forcefully, as this can cause misalignment.
  • Use doorstops to prevent doors from swinging open too far and potentially causing misalignment.

Maintaining door frames to prevent warping

Door frames can warp over time, causing doors to not close properly. To maintain door frames and prevent warping:

  • Keep the area around the door frame dry to prevent moisture absorption, which can lead to warping.
  • Apply a protective finish or paint to the door frame to provide a barrier against moisture and humidity.
  • If you notice any signs of warping, such as gaps between the door and frame, consider repairing or replacing the affected area.

Periodically checking and tightening screws or hinges

Loose screws or hinges can prevent doors from closing properly. Regularly checking and tightening screws or hinges can help maintain proper door alignment. Here’s what you can do:

  • Inspect the screws and hinges on your doors to ensure they are secure.
  • If you find any loose screws, tighten them using a screwdriver.
  • Consider using longer screws to provide a stronger hold if the existing screws are not sufficient.

Importance of lubricating door hinges

Lubricating door hinges is essential for smooth door operation. It reduces friction and prevents squeaking noises. Here’s how you can lubricate door hinges:

  • Use a silicone-based lubricant or a light machine oil to lubricate the hinges.
  • Apply a small amount of lubricant to the hinge pins and moving parts of the hinges.
  • Open and close the door several times to distribute the lubricant evenly.

Closing Notes: How To Fix A Door That Won’t Close

How to fix a door that won't close

In conclusion, fixing a door that won’t close doesn’t have to be a daunting task. By following the steps and tips we’ve provided, you’ll be able to tackle this common issue with ease. Remember to check for misaligned hinges, inspect your door frame for swelling or warping, and tighten any loose screws or hinges.

Regular maintenance and lubrication will also go a long way in ensuring smooth door operation. So, say goodbye to that stubborn door and enjoy the satisfaction of a properly closing entrance. Happy fixing!